How to choose a single bunk bed correctly? What needs attention?

/in /by

The use of single-person bunk beds is very common, whether it is in school or in the staff dormitory or even some families may use single-person bunk beds, because this kind of bed can not only meet the use of multiple people, but also compares Save space and maximize the use of small space, so now many people choose to buy up and down the bed, so how should we choose when purchasing? What should I pay attention to when purchasing? How to choose the right one?

1. Ensure safety

Safety is still very important. Regardless of other factors when purchasing, first look at the safety of getting in and out of bed. Only after the safety meets the standard of use, it is not easy to have accidents during use, especially for some children. There will be bumps, so there should be no dangerous sharp edges and edges when getting on and off the bed, and edges and corners should be rounded or chamfered. The design of the corners of the upper and lower beds should be rounded to reduce the damage caused by bumps and ensure safe use.

Cheap Adult Bunk Beds

2. Guaranteed strength

The safety of getting in and out of bed is very important, and the strength of getting in and out of bed is also very important. If the strength is not enough, it will definitely be more prone to problems in the process of use, so when purchasing, you must look at the strength of getting in and out of bed. Whether it meets the standards, whether the edges and corners of the upper and lower beds are properly handled, and whether other designs are potentially dangerous to people.

3. Environmental protection and safety

In addition, the material, glue, paint and process of the upper and lower beds are very important, whether they contain harmful chemical substances, such as various common harmful heavy metals, benzene, phenol and free formaldehyde. Whether it is an adult or a child, these substances are harmful to the body, so you must pay attention when purchasing!

4. Material selection

The materials of the bunk beds are generally steel, iron and wood. These three are the most common ones used now. Among them, the steel single bunk bed is relatively safe, and the wooden style is better. It is used in the family. It is convenient, so you can choose according to your own needs when you choose.

Cheap Adult Bunk Beds

5. Color selection

When purchasing single bunk beds, try not to choose bunks with too bright colors, because long-term use will affect your mental health, you must choose elegant and stable colors. It is more versatile and attractive and beautiful!

6. Better workmanship

The workmanship of the single person getting on and off the bed should also be good. Whether it is the stability of the bed body or the welding of the material, it is necessary to meet the standard of use and ensure safety. Only when the workmanship is good can the quality of the single person get on and off the bed be guaranteed. .

The above is all the content of how to correctly choose a single-person bunk bed. From the above content, these are very important. Only when these conditions are met, then the purchased bunk bed is a safe and qualified bunk bed. This ensures that it is safer to use.

How to prevent auditorium chairs from wearing out?

/in /by

As a public chair with high frequency, auditorium chairs are widely used in auditoriums, conference rooms, theaters, cinemas and other places. Natural wear and tear is very common. How to reduce the wear and tear of auditorium chairs has become an auditorium chair. Manufacturers and customers worry about problems.

First of all, we must understand the wear resistance of auditorium chairs. This should be judged according to the information provided by auditorium chair manufacturers. Different wear resistance properties have different degrees of wear and tear, and the way of wear should also be understood. The wear mainly comes from the wear of the sponge, the wear of the footrest and the wear of the seat back plate.

The wear of sponge is often caused by insufficient load-bearing capacity or excessive load-bearing capacity, causing abnormal wear, failure to rebound, deformation, no bearing capacity, hardening, etc., all of which are sponge wear, and sponge wear is often irreversible. Therefore, to prevent the wear of the sponge, it is necessary to know the bearing capacity of the sponge. This can only be obtained after many tests by the manufacturer. Strictly complying with the data given by the manufacturer is the most effective way to prevent the sponge from wearing.

Multimedia classroom soft chair

The wear of the footrest is often caused by the oxidation of the writing board and the foot. To prevent the oxidation of the foot, it is necessary to maintain the indoor humidity, not too humid, because the metal and oxygen are more easily oxidized in a humid environment, and regularly check whether the foot is rusted. Once the signs of rusting are found, they should be treated with a solution that prevents rusting in time, and the writing board should also be regularly checked for wear and tear, and whether the joints are loose.

The wear of the seat back panel will come from changes in the environment, because the seat back panel is mostly wood and paint. If the environment is too dry and the temperature is high, the seat back panel will crack and lose the paint, and if the environment is too humid, it will become moldy and paint off. , so maintaining indoor temperature and humidity is an effective way to protect auditorium chairs and must not be underestimated.

Auditorium chairs are also very fragile, so they should be taken care of when used and cleaned regularly.

1. Dry the cotton auditorium chair with a soft cloth, then dry. Fabric maintenance It is forbidden to use wet cloth, hard objects or chemicals such as acid and alkali to contact the fabric, so as not to affect the surface quality and service cycle. If it is stained with beverages and juices, you can use a paper towel to absorb the water, then wipe it with a neutral detergent dissolved in warm water, then dry it with a clean soft cloth, and finally dry it at a low temperature.

2. Wipe the cloth auditorium chair with water, and then dry it. For general maintenance, you only need to gently wipe with a clean and soft cloth. If you want to clean up the dirt generated by long-term use, the most ideal way is: first wipe with a neutral detergent diluted with warm water, and then use a wrung clean cloth Wipe off the cleaning solution, and finally polish with a dry cloth. After it is completely dry, use an appropriate amount of conditioner to wipe it evenly.

Auditorium chair

3. The vacuum cleaner is suitable for auditorium chairs made of all materials. The gap between the back, armrest and seat surface can be cleaned with a vacuum cleaner. However, when using a vacuum cleaner, do not use a suction brush to prevent damage to the weaving thread on the textile cloth and make the cloth fluffy, but also avoid sucking with extra strong suction, which may cause the weaving thread to be torn off, so consider using a small vacuum cleaner to clean.

4. There are requirements for the cleaning of wooden auditorium chairs. For wooden materials, avoid placing beverages, chemicals or overheated objects on the surface, so as not to damage the natural color of the wooden surface; leather materials have strong absorption, and attention should be paid to antifouling; leather materials should be cleaned with a special cleaning agent for leather, and avoid using strong detergent.

5. The cleaning of metal auditorium chairs is exquisite. The maintenance of metal materials can be wiped with a soft rag, but avoid using rough, organic solvents (such as turpentine oil, decontamination oil) or wet cloth to wipe, these are the main reasons for surface scars and rust. Wipe frequently with dry cotton silk or a fine cloth to keep it shiny and beautiful.

The above are some tips on how to prevent the wear of auditorium chairs and the daily maintenance of auditorium chairs. Only by taking care of them regularly can we be more comfortable and relaxed when doing it.

How to distinguish the pros and cons of auditorium chair leather?

/in /by

Nowadays, auditorium chairs have been widely used in theaters, cinemas and school auditoriums. Due to the increasing market demand year by year, a large number of manufacturers have also emerged, but there are still many black-hearted manufacturers selling substandard auditorium chairs.

For leather auditorium chairs, special leather is used, which must be treated with anti-ultraviolet, heat-resistant, light-resistant, wear-resistant, etc., and the cost is high. Therefore, some unscrupulous manufacturers will use other low-priced leather to recharge. Consumers are buying leather auditoriums. When using the chair, pay attention to distinguish the true and false leather, the pros and cons. Let’s take a closer look at how to distinguish the quality of auditorium chair leather!

Multimedia classroom soft chair

1. Document Law

The leather of the original factory has a clear source, and the basic information such as the production place, the tannery label, the leather test table, the leather use authorization letter, etc., is indispensable.

2. Label method

For genuine leather, the date of manufacture, the name and area of ​​the leather factory, etc. will be marked on the back. (The date of manufacture should not be too long, and if the leather is more than 3 years old, you should pay attention to whether there is mildew).

3. Viewing method

Under a 30x magnifying glass, it can be seen that the leather surface is like the surface of the moon, with craters and holes, and its air permeability is good. Cut the leather crosswise with a blade, and it can be seen that the color of the leather from the outer layer to the inner layer must be the same. Pay attention to whether there is a different color under the outer layer, and avoid buying second-hand leather that has been dyed or changed color.

Stage classroom soft chair

4. Smell method

Good leather should not have a pungent smell after treatment, so too much solvent smell and paint smell is not good.

5. Heat resistance method

Ask the manufacturer for a small piece of leather, and touch the sample with a cigarette butt for 2 to 3 seconds to avoid buying PU products. Burning with a lighter requires a longer time due to the large contact area.

6. Wipe method

Wipe off the stained oil and wipe the surface of the leather, pay attention to whether there is fading and falling off, and you can avoid buying leather that has changed color twice.

The above are six methods to distinguish the quality of auditorium chairs, I hope to help you buy auditorium chairs.

More details on the purchase of auditorium chairs:

How to choose a good quality auditorium soft chair?

What are the tips for choosing auditorium chairs

Why do university lecture halls use row chairs?

/in /by

We all know that the classrooms in universities and colleges are much larger than those in primary and secondary schools. The ground is also stepped, and row chairs are usually installed, which not only makes reasonable use of space, but also enables students in each area to see the blackboard in front. So, do you know why the university lecture halls use row chairs more?

The correct configuration of school furniture effectively affects the learning efficiency of students. Nowadays, with the changes of the times, row desks and chairs are more and more popular in schools. They are fashionable and popular with students. Therefore, many colleges and universities When choosing desks and chairs, they like to purchase desk rows.

Most of the row chairs used in the amphitheater are composed of four parts: seat, back, armrest and standing feet. The structure is generally steel-wood structure or steel-plastic structure.

Lecture-Hall-Step-Desk-Wooden-Ladder-Chair2

1. The seat board can be automatically recycled

Because the form of row chairs is different from that of ordinary student desks and chairs, usually desks and row chairs adopt a silent and slow-rebound spring structure, so the seat plate of the ladder desk can be automatically recovered during use. This can effectively save school classroom space, make good use of the space, provide students with a high-quality learning environment, and effectively improve students’ learning efficiency.

2. The back material of the row chair is excellent

The back of the row chair is made of high-quality cold-rolled steel plate by molding. After the surface is treated with anti-oxidation, it is treated with high temperature spraying. It has strong adhesion, impact resistance, corrosion resistance, no anti-rust, no fading, and durability.

3. The writing pad is comfortable to use

The fixed table top of the row chair writing board is made of high-density particleboard with double-sided pressure fireproof board, and the front is treated with semi-circular edge processing. Compared with the ordinary sealing and straight edge process design, it is more comfortable to keep the hands on the table board for a long time.

AY-J 04

4. The row of chairs can effectively correct the sitting posture of students

High-quality desks and chairs can not only provide students with a high-quality learning environment, but also can effectively correct students’ sitting posture to ensure that they are not short-sighted or hunchbacked, so the use of desks and chairs can bring enough comfort to students.

5, a wide variety of models, complete models

Nowadays, there are various materials for making row chairs, and their specifications and styles are also very complete. Therefore, when choosing desk rows and chairs, you must choose according to the actual use needs, but you need to pay attention to whether the quality of the material is the quality of the material. For qualified products, or to experience its experience in person, to ensure sufficient comfort and safety.

Seeing this, I believe everyone has understood why the university lecture halls use row chairs more often. The diverse needs of row chairs are deeply loved by the majority of students.

Apartment bed installation precautions and maintenance methods

/in /by

In order to facilitate the transportation of apartment beds, manufacturers usually disassemble the beds for transportation. After the customer receives the goods, the staff will assemble them. This installation process will take a long time. Efficiency and other issues, apartment bed manufacturers have sorted out some precautions and maintenance methods for apartment bed installation, hoping to help everyone.

Matters needing attention before installing the apartment bed

1. Clean up the site

Complete the cleanup of the installation site. The porters and installers of the apartment beds all have specific job contents and are not responsible for cleaning the site. If the cleaning work is not done in time, it is easy to cause a delay in the installation time, and it will also lead to an increase in labor costs.

2. Confirm the installation team

It is necessary to communicate with the apartment bed manufacturer in advance to confirm that there are several people in the team and who is in charge. This can also better communicate, improve work efficiency, and avoid unnecessary emergencies during the installation of apartment beds that affect acceptance and later use.

Black Metal Bunk Bed Frame

Matters needing attention in the installation of apartment beds

1. Avoid bumps

The apartment bed is a large item, and the weight is not light. At least two people can move it. When moving, pay attention to whether it will touch the wall, wipe the floor and other items, and pay attention to the safety of personnel.

2. Place smoothly

When placing the apartment bed, the ground should be kept flat, and the four legs of the bed body should be stable and flat on the ground.

Double Decker Bed

Matters needing attention after the apartment bed is installed

1. Check the integrity

After the installation is completed, the staff will check and confirm, and they will also conduct a comprehensive confirmation to ensure that everything is in place. During the assembly process of the apartment bed, it is inevitable to move, so whether there will be collisions and conflicts in this process, which will cause damage to the appearance of the apartment bed, and the installed accessories should also be checked to see if there are any missing or misplaced installations. Negotiate solutions with apartment bed manufacturers.

2. Check the stability

The fixed dormitory furniture such as the apartment bed must be in stable contact with the ground, and there should be no shaking. If the shaking is caused by the unevenness of the ground, the assembler should make the bedding treatment. If the bed is shaken due to missing parts , let the staff adjust in time to ensure the stable use of the apartment bed.

3. Check the usability of parts

Each component of the apartment bed has its own function. After the assembly is completed, these functions should be tried one by one, including drawers, wardrobes and bookcase doors, pulleys, wiring troughs, keys, handles, etc. These are the guarantees to ensure that the apartment bed can be used normally. If there is a problem, let the manufacturer’s personnel debug or rectify it on site.

Black Triple Bunk Bed

The maintenance method of the apartment bed

The apartment bed should also be properly maintained in the later use process, so as to prolong the service life of the apartment bed.

1. Use of dust removal tools

For cleaning and dust removal, pure cotton knitwear is used as a rag to wipe the appearance of the apartment bed furniture. For dust in some recesses and embossments, a gold trim wool brush can be used to remove dust.

2. Keep away from acid and alkali

Special attention should be paid to the acid and alkali that have a corrosive effect on the apartment bed. If the apartment bed is mistakenly stained with acid (such as sulfuric acid, vinegar), alkali (such as methine, soapy water, and soda water), you should immediately rinse the dirty area with clean water. Clean and dry with a dry cotton cloth.

3. Keep away from the sun

The location of the apartment bed should avoid the sunlight outside the window. The apartment bed will be exposed to sunlight for a short time, which will change the color of the paint; the colored paint layer will dry and crack, and the metal will be oxidized and deteriorated. If you are exposed to severe sunlight and cannot move your apartment bed, shade it with curtains or blinds.

4. Pay attention to humidity

Pay attention to the indoor humidity, which should be maintained within the normal value. Apartment beds should be kept away from humidifiers, as wetting can cause rust on metal, peeling of chrome plating, etc. When cleaning, do not use boiling water to wash the iron frame, you can wipe it with a damp cloth, but do not use water.

5. Deal with rust

If the apartment bed is rusted, don’t sand it on your own. If the rust is small and shallow, you can use cotton yarn dipped in oil to apply it to the rust. After a while, wipe it with a cloth to remove the rust.

The above is a detailed introduction to the precautions for the installation of apartment beds. Whether the apartment bed is confirmed before installation or checked and maintained after installation, attention should be paid to the details of each step, so as to ensure that the apartment bed is safer and more convenient to use and prolong its service life.

How to repair damaged student desks and chairs? Maintenance method introduction

/in /by

It is relatively common for students’ desks and chairs to be damaged during use, because students in their student days are more lively and active, and may deliberately destroy desks and chairs, so that desks and chairs will appear. If it is damaged, it can be repaired or replaced with a new one. However, the school’s annual budget is limited, and in most cases, it is repaired. How to repair the damaged student desks and chairs?

First, desk and chair table and chair surface damage repair

Classroom Chairs and Tables

The materials of the table and chair surface are generally three kinds of wood or plastic steel:

1. Steel is generally not damaged, but the coating on the surface may fall off, so when the coating on the steel table and chair surface falls off, it must be repaired in time. This repair is generally required. Sand and clean, then re-coat the paint and wait for it to dry before use.

2. If the surface of the plastic table and chair is too thin and brittle, it is relatively easy to damage, or it will be damaged when it is damaged by sharp objects and harmful substances such as fire. Generally, if the damage area of ​​the plastic material is large, it cannot be repaired normally. It needs to be replaced every time. If there are only scratches, or some small areas of damage, we can choose to use glue to bond, and then grind and smooth it.

3. There are also more wooden desktops now, because wooden ones can give people a fresh, natural and comfortable feeling, so they are also used more, but wooden ones are more easily damaged. If the wood is poor, it is more likely to be damaged. In the case of damaged wooden desks and chairs, if the damage is small, you can choose woodworking technology for processing, and if the damage is large, you can consider replacing the desks and chairs.

Second, desk and chair table and chair leg damage repair

Classroom Style Tables

1. Steel desks and chairs The legs of desks and chairs are generally made of steel. The legs of this kind of desks and chairs are relatively strong and generally will not be damaged during use, but if they are bent or broken, they can be Replacement treatment, if only the paint surface is peeled off, it can be repainted. Another problem is the anti-skid and noise-proof pad of the steel table and chair legs. If the anti-skid pad is damaged, it can be replaced in time to ensure normal use and the stability of the table and chair.

2. The legs of plastic tables and chairs are generally solid, so that they can be used for support, but this table and chair cannot be used by older students, because the load-bearing capacity may be small, and the table and chair legs of this material have poor fire resistance, so when using pay attention.

3. The wooden desk and chair legs are more likely to be damaged, because the wooden ones are likely to be damaged by fire, water, or humid environments, knives, or even vigorous pushing and stamping. Repair small scratches, replace chair legs in case of major problems.

3. Other damage repair of desks and chairs

Others include table pockets, screws, table and chair sides, etc. It is common that the protective layer on the table and chair sides falls off, repair and replace it in time, and the screws fall off, just tighten it, and the damage to the table pocket is less. , If the quality of the wood is poor, it may be loose, just tighten it with nails.

The above is the entire content of how to repair the damage of student desks and chairs. In fact, the points that are easily damaged are the above. We only need to use appropriate methods to repair or replace them, so that the safety of use and life can be guaranteed. .

Material description and advantages of student desks and chairs

/in /by

We all know that traditional desks and chairs are made of yellow wood. The legs of the desk and the desktop are nailed together with nails, and over time, there are potholes on the desktop. Later, in order to protect the service life of the desks and chairs, the school All wrapped up with tablecloths. But now there is no need to worry about desks and chairs so much. Its material is resistant to aging, moisture-proof, flame-retardant and has many advantages. The following school office furniture manufacturers will give you a detailed introduction to the commonly used materials and advantages of student desks and chairs!

Common materials for student desks and chairs

1. The frames of the desks and chairs are all made of high-frequency welded steel pipes with a wall thickness of 1.2mm or more, the main support frame steel pipe wall thickness is more than 1.5mm, and the surface of the steel pipe is electrostatically sprayed, which is characterized by strong adhesion and good richness. The surface of the spray coating is fine, smooth and mechanically good.

2. The class bucket of the desk is usually formed by one-time stamping bucket. The surface of this material is smooth and seamless, and the safety is high.

Tables for School Furnitures

3. The desktop version uses 18mm fireproof board veneer, which belongs to the post-forming board and has good properties such as heat resistance, wear resistance, smoke resistance, acid and alkali resistance, and impact resistance, and the veneer color of this material is brighter , loved by students.

4. The back and seat surface of the chair are made of multi-layer veneer bent board bottom plate, and the surface is pasted with fireproof board, which is formed by hot pressing. This material and process has good gluing performance, durability, high strength, realistic texture, smooth surface and beautiful color. Its thickness is 12~14mm. One-time forming PVC, hollow plastic and other materials are also commonly used materials for chair surfaces and can be used.

5. The desks and chairs of the general amphitheatre are made of melamine board, which has the properties of heat resistance, acid and alkali resistance, smoke resistance and impact resistance. The support frame of the main body is made of steel pipes with a wall thickness of more than 2mm, and other parts are made of steel pipes with a thickness of more than 1.2mm. There are soft and hard seats for the flip plate.

College Classroom Tables

The advantages of student desks and chairs

1. The high-frequency welded steel pipe used in the main body is like a plastic steel window, which will not deform or deteriorate even if it is exposed to wind, sun and rain, and its service life can reach more than 15 years.

2. The legs of this desk and chair are wrapped with foot covers, so students will not make noise when they move, and will not affect the learning of other students.

3. The surface of the table and chair is smooth and no nails are exposed, and it will not hang on the students’ clothes, with high safety performance.

4. The desks and chairs made of this material will not deteriorate or deform when exposed to water, which is convenient for students to clean, and there is no need to worry about them being deformed by moisture when cleaning in the classroom.

5. There are serious fire safety hazards in public places. In order for students to have a safe learning environment, the desktop chairs are made of fire-resistant boards with good flame retardant performance and high safety factor.

Furniture for School Children

6. The desks and chairs are made of green and healthy materials. The raw materials meet the relevant standards and have no peculiar smell. There is no need to worry about the occurrence of formaldehyde exceeding the standard and affecting the health of students.

The above is the whole content of the material description and advantages of students’ desks and chairs. After the above introduction, we have learned that the main body of the desks and chairs is made of high-frequency welded steel pipes. The bottom plate and the surface are pasted with fireproof board. The desktop of the amphitheater is made of melamine board, and the flip board has soft and hard seats. The use of the above materials has the advantages of aging resistance, flame retardant, moisture resistance, green health and so on.

What are the factors that affect the quality of desks and chairs?

/in /by

There are many types of desks and chairs on the market, the price difference is large, and the quality is also uneven. If you blindly choose cheap ones, then the quality is definitely not guaranteed. There are many factors affecting quality. If you want to buy good quality products, we must first understand what factors affect the quality of desks and chairs?

Process factors that affect the quality of desks and chairs

1. Welding wheel diameter

The diameter of the welding wheel determines the diameter of the nugget. As the new welding wheel is ground again and again, the diameter is gradually reduced. The touch area between the desks and chairs and the steel strip decreases, the current density increases, and the pressure on the welding point It is also added, so the diameter of the welding wheel cannot be too small.

2. Welding current

The influence of the welding current of the desks and chairs on the heat is related to the second power. As an adjustable parameter, it can be selected according to the thickness of the welded steel strip. The factors affecting the change of the actual current are the fluctuation of the power supply voltage and the resistance of the secondary loop. In order to ensure that the desks and chairs are not affected by external conditions, it is necessary to adopt a constant current control system.

Cheap School Desks and Chairs

3. Welding time

The welding heat of the desks and chairs is proportional to the welding time, but the power-on time is controlled by the running speed of the welding wheel. Under normal circumstances, there is no need to make adjustments. Even if you adjust, you only need to make small-scale adjustments.

4. Touch resistance

The greater influence on the occurrence and spread of heat is the resistance of the touch surface of the steel strip. The main influencing factors of the touch resistance are the cleanliness and roughness of the touch surface. If the touch surface of the desk and chair has high resistivity oxide or dirt The layer will increase the resistance. If only part of the dirt or oxide is present, the current will be unevenly distributed, so the touch surface needs to be kept clean and tidy. If the touch surface is rough and uneven, the desks and chairs will form part of the touch point, and a relatively large current will occur at the touch point. At the same time, the touch resistance will increase due to the decrease of the current channel.

Use factors that affect the quality of desks and chairs

Childs School Desk and Chair

1. Deliberate destruction: When using it, deliberately destroying, stepping on tables and chairs, hitting tables and chairs with hard objects, or using sharp objects to portray the tables and chairs, no matter how good the quality is, the desks and chairs are easily damaged, causing deformation or falling apart. It directly affects the shortening of its service life.

2. Improper maintenance: If you encounter strong corrosive detergents, the tables and chairs will be corroded. After a long time, the table and chair surfaces or the main frame will rust. Rust will cause the material to become thin and directly affect the product quality.

3. Inadequate cleaning: If it is not cleaned for a long time during use, it will cause residual oil on the desk, and if it is not cleaned regularly, it will cause the desktop to be corroded.

4. Pulling hard: Sometimes school activities need to move or move the desks and chairs. When moving, you must lift the desks and chairs to move. Do not pull hard, otherwise it will cause the table legs and chair legs to become loose or damaged.

What are the factors affecting the quality of desks and chairs? In response to this problem, the editor introduced the process factors and use factors that affect its quality. Process factors include welding wheel diameter, welding current, welding time, touch resistance, etc., use factors include deliberate damage, improper maintenance, improper cleaning, and harshness. Wait.

What are the tips for choosing auditorium chairs

/in /by

With the improvement of living standards, most auditorium chairs are chosen when decorating lecture halls and auditoriums. Because this kind of seat is visually elegant and tidy, it allows people to blend into the environment more quickly, and sit up more comfortably. Even if you sit for a long time, you will not feel discomfort.

However, there are various styles and materials of auditorium chairs on the market, and the prices of similar seats are very different. How to choose the correct one also makes many of us feel annoyed.

Auditorium chair

1. Material of auditorium chair

The materials of the seats are also diverse, such as the seats and backs of lecture hall chairs and auditorium chairs, which should have the characteristics of heat insulation, heat preservation, flame retardancy, sound absorption, shock absorption, anti-static, and good air permeability; The seat and back shell should be equipped with silencing holes, which can effectively eliminate environmental noise; the design of the base and some seats should pay attention to its durability and stability; the fabric should be flame-retardant, stain-resistant, and fade-resistant, which is easier to clean. Environmental protection is also very important! For the paint surface and the tripod materials, ask whether the selected materials are environmentally friendly paint and environmentally friendly materials.

2. Appearance of the auditorium chair

Whether the color and appearance of the seats can be integrated into the decoration style of the display hall: For example, the lecture hall, which is a large conference room, is mainly used for conferences or academic reports with a large number of people. Business administrations and colleges and universities place more such halls . The overall color is slightly darker and thicker. If you choose a lively color in the lecture hall, it will give people a very abrupt feeling; the shape of the seat should be ergonomically designed and comfortable, but if it is too full, it will greatly reduce the hall. The utilization rate of the space should be taken into consideration while focusing on comfort.

Stage classroom soft chair

3. Function

Common lecture halls are mostly configured with tables and chairs. With the update of technology, chairs can also replace the functions of tables. Choosing lecture hall chairs with writing boards can greatly improve the utilization of space. In addition, the speed of admission and evacuation of large conferences is also very important. Choosing seats with automatic return design can speed up the speed of conference admission and evacuation. (Note one point when choosing, be sure to choose a seat with no noise in the return position)

4. Service

Why do I need to choose a service when choosing a seat? The seats placed in the lecture hall are usually hundreds or even thousands of chairs. Basically, they are directly ordered from manufacturers. Most manufacturers will choose a good reputation. Once the reputation is good, the design and production of the seat will not be bad. Follow-up The installation and service are also relatively complete, and we can be more assured.

The above points are to teach you how to choose a suitable auditorium chair. When choosing an auditorium chair, you must first look at the place where it is placed, and then look at the seat material, appearance, seat function and manufacturer’s services. You can also write to us for advice.

How to choose a school desk and chair set manufacturer?

/in /by

Winter vacation is coming, many schools will start to consider purchasing a new batch of student desks and chairs for students to use after the school starts, but if you want to buy high-quality and cheap student desks, chairs and other office appliances, it is recommended that you directly find the manufacturer. However, there are many such manufacturers on the market, so you must choose the right manufacturer. Then how to choose a school desk and chair set manufacturer? What factors need to be considered when choosing a manufacturer to avoid getting into a misunderstanding and being fooled?

Reputable desk and chair manufacturer

The first is to choose a manufacturer with a better reputation. Maybe we will encounter some rumors in our daily life that the quality of a certain product is not good at all, and the product breaks after a short time. Some product manufacturers have a lot of good reputation, this is what we would say to XX. They have good service attitude and good quality, so when choosing, choose a manufacturer with a good reputation and high reputation.

Single Desk Chair

Manufacturer’s manufacturing capacity

Large manufacturers produce the entire set of desks and chairs by themselves. Welding, spraying, and panel injection of steel tubes are all done in their own factories. Such desks and chairs manufacturers have price advantages, reliable quality, and high production speed. Restrictions, especially during peak seasons, if other people’s factories are busy, the delivery time will definitely be extended.

The second is production equipment, because good production equipment can produce good products. You can go to the factory for on-site inspections. It is recommended not to consider equipment that is too old or outdated.

Therefore, when choosing a manufacturer of student desks and chairs, we suggest to visit the manufacturer’s production workshop and take a personal look at the manufacturer’s hardware strength. Take a panel workshop as an example. Normally, we need 10 or 20 injection molding machines. It will cost several million, and it is definitely difficult for manufacturers without some strength.

Classroom Style Tables

Look at the manufacturer’s service attitude and after-sales

There is also the attitude of service. Now the competition between any industry is not only on products. The attitude of service can better reflect the degree of attention to customers and products. Although the price is high, it is well received by the public. Good service is basically for the sake of customers everywhere, so the service attitude is also very important; after all, the after-sales service of desk and chair manufacturers is an important part of it, and afterwards it is the protection of consumer rights, because any product cannot be used in the process. There will be some small problems to avoid, and these problems need to be dealt with after-sales service by the manufacturer.

Because the desks and chairs will be damaged after a long time of use. Many times need to buy some accessories to repair them before they can be put into use again. This is why when we choose manufacturers, we must choose desks and chairs with high-quality and thorough accessories.

The above is a simple sharing on how to choose a student desk and chair manufacturer. Generally speaking, conventional student desks and chairs are in stock, and unconventional desks and chairs need to be customized. The off-season order time is about ten and a half months. The peak season is more than one month in advance, and the factory direct sales prices are preferential, eliminating the link of middlemen, allowing you to choose the right products.